Showing posts with label History of Science. Show all posts
Showing posts with label History of Science. Show all posts

Monday, 23 December 2013

John "Longitude" Harrison display installed at Leeds City Museum

Audio visual content being loaded on to touchscreens.
The display is located near the front entrance of Leeds City Museum
A little tweaking to do, but the display is ready for visitors now. This display complements the displays at the Royal Observatory, Greenwich (part of the National Maritime Museum) that are dedicated to navigation, precision timekeeping and John Harrison. It is the only display outside of London about John Harrison, and, by chance, is near to his birthplace, Foulby, Wakefield. Harrison's magnificent contribution to advancing precision timekeeping cannot be overstated, equally so its significance. It not only advanced navigation science, and map making, but has also had profound effects on engineering and technology. Harrison was an autodidact, his was an intellectual journey to achieve precision timekeeping as a means of finding longitude at sea, the lack of such means being a huge problem for mariners on their journeys. Pervasive throughout cultures around the world, in art, literature, poetry, music, film and faiths, are references to journeys and navigation, to time and stars. The star of Bethlehem, guiding the three kings on their journey for example, or Eccesliastes 3:1, "There is a time for everything, and a season for every activity under the heavens". Or in literature, fiction, and non-fiction equally, from Peter Pan, and The Voyage of the Dawn Treader, to the biographies of great people like Albert Einstein, Captain James Cook, or Charles Darwin, and the voyage of the Beagle, the putative beginning of Darwin's long thinking and reflection that led to the great truth he discerned, The Origin of Species. Whenever I have encountered them, these references, they have stood out to me.
Directions to Leeds City Museum:
Second star to the right, and straight on 'til morning. Free top-ups of fairy dust available from Tinker Bell via your phone network. Your network may charge for call time. Call TINK, or 8465, to top up.

Second star to the right, and straight on 'til morning, keep on trekking!
"Location aware music" contemporary performance art and GPS combined, in a great example of the human drive to create beauty, and seek moments of awe, and using new technologies to serve this human need.
Sidereal time is the time scale that is based on the Earth's rate of rotation measured relative to the fixed stars. This is a technique that was known and used by John Harrison in regulating his timekeepers. "All men have stars, but they are not the same things for different people. For some, who are travelers, the stars are guides…."
John Harrison advanced precision timekeeping, by mechanical means, by an amount that had not been seen before or since. Today the time standard is kept by atomic clocks, that in a sense are gauging the entropy of the universe. We can understand what timekeeping is, but what is time itself? Perhaps the best explanation is the concept of the arrow of time. Albert Einstein's special theory of relativity also goes some way, perhaps, of explaining what spacetime is. Einstein also had a very good sense of humour: “When you are courting a nice girl, an hour seems like a second. When you sit on a red-hot cinder, a second seems like an hour. That's relativity.” This much is certain: time is a precious resource, not to be wasted, crack on, like smoke and oakum.

Sea Fever

BY JOHN MASEFIELD
I must go down to the seas again, to the lonely sea and the sky,
And all I ask is a tall ship and a star to steer her by;
And the wheel’s kick and the wind’s song and the white sail’s shaking,
And a grey mist on the sea’s face, and a grey dawn breaking,
I must go down to the seas again, for the call of the running tide
Is a wild call and a clear call that may not be denied;
And all I ask is a windy day with the white clouds flying,
And the flung spray and the blown spume, and the sea-gulls crying.
I must go down to the seas again, to the vagrant gypsy life,
To the gull’s way and the whale’s way where the wind’s like a whetted knife;
And all I ask is a merry yarn from a laughing fellow-rover,
And quiet sleep and a sweet dream when the long trick’s over.



The hard opening of the display was on 23/01/2014, and was marked with a very fine lecture, to an audience of nearly 180, by Dr Richard Dunn, Senior Curator, Science, Technology and Navigation, from the National Maritime Museum. 
Blog of the Board of Longitude project "Leeds leads"
Posted by Ian Fraser



Monday, 23 September 2013

Why have regional collections?

So why is it important to have regional collections? Wouldn't be better if we had a few big, very well equipped super museums, like for instance, The Natural History Museum? 

Well there are a lot of reasons why not having all your eggs in one basket (excuse the pun) is important for collections. Firstly, many local museums focus on housing specimens or objects from their region. There are lots of specimens in the bird collection that have been collected from in and around Leeds and out of all the birds they often have the most detailed data.

Secondly, for education purposes it's great that everyone doesn't have to travel to one, sometimes quite distant, place to see something. If you want to learn about a subject, whether it be history, textiles, natural sciences or ceramics (to name but a few), it's a fantastic resource (not to mention cheaper) to be able to go to your local museum. We have varied groups, from small children to people from historic societies or just curious members of the public coming to look at the collection and everybody can find something that is of interest that they want to know more about or can relate to.  

Thirdly, it spreads risk. What if you had all the paintings by Picasso housed in one building and there was a fire? Everything would be lost. Having things spread out in different locations not only means that more people have access to different resources but that there is more security and safety for things that may be historically or socially valuable.

In terms of the bird skin collection, the detailed data attached to the specimens is useful information for local natural history societies and local biological recording centres, as they can give a historical reference point to where certain species have been found and if they are still there. Have some species become locally extinct, or have we started having occurrences of other animals not usually associated with the area because of climate change? If something has become locally extinct and they want to re-introduce it they can look at the data to see where it was traditionally found and take steps to improve the habitat in that area so that it will once again support that species.



Sunday, 17 February 2013

Outreach

Knole Park, Sevenoaks, Kent, a National Trust property
The collections and historic buildings at Leeds Museums and Galleries have a very high cultural value, so much so that many of the collections are Designated as being of national significance. Moreover, Temple Newsam House is the greatest historic house under local authority management in the United Kingdom. This value, or intellectual capital, has been created by curatorial expertise, often with conservation support. Curatorial expertise, and leadership, and what is generated from these for visitors, are core functions and strengths of service delivery. All other museum functions, including conservation, are, in effect, parasitical to those core strengths, i.e. they draw their reason for existence, and the "raw materials" of service delivery from the core strengths. The expertise, experience and judgment built up by working with these great collections and buildings has value to other organisations in advisory capacities. Two examples of outreach to other heritage organisations, to which I have contributed, are set out here.
The team at Knole Park, Sevenoaks, Kent, will be, all being well, embarking on a multi-million pound project to conserve the building fabric, interiors, and collections of the National Trust's (NT) largest, most important and most problematic historic house. The project also has a major audience development element, in keeping with the NT's policy of "Bringing places to life". Very excitingly the NT plans are to include the creation of conservation studios in the medieval barn adjacent to Knole. The NT are preparing a Stage 2 bid to the Heritage Lottery Fund for project funding, and as part of developing the bid held a specialists' consultation day on 06/02/2013. Specialists in conservation, archaeology and historic house interpretation and audience development were invited by the National Trust to review their plans and comment. The exercise will help the National Trust to develop its Stage 2 bid to the Heritage Lottery Fund.
The medieval barn at Knole. It was badly damaged in a fire in the 1980s, and the
roof is modern. As part of the buidling's conversion to conservation studios the original
steep roofline will be restored.
Maquette of the Carved Room at Burton Constable Hall
Burton Constable Hall, near Hull, with whom LMG has worked in partnership since 1992, has a hugely interesting Baroque interior, from about 1680, the Carved Room. Unfortunately this room was heavily interfered with, and damaged, when it was converted into a catering kitchen, when Burton Constable Hall was still a private house. The room is entirely wooden panelling, and replete with fine carved mouldings. Most of the panelling survives ex situ. Paint analysis shows that it had a very light green, terre verte decorative scheme, with elements of the carving picked out in gold. There is also a fine double-vaulted ceiling that will need re-consruction, along with the extensive woodwork repairs, installation and decorating of the panelling. The sash window is one of the earliest in existence, contemporary with sash windows at Hampton Court. Elevations of the walls have been drawn, as well as ceiling plans. The distribution of green and gold has been mapped. Wooden components have been linked to their places on the elevations. The maquette in the picture has been prepared both for visitors and for Burton Constable Trustees. With plans and costs now all determined the next step is applications for funding to funders like the Pilgrim Trust, the Monument Trust and the Heritage Lottery Fund. It is going to be a thrilling project, and a rare opportunity to research and re-construct a Baroque interior, and an opportunity to refresh the joiner and carver skills.


Design for the vaulted ceiling

Posted by Ian Fraser




Sunday, 6 January 2013

Time is fleeting.....

Re-assembly at LMDC
Harrison clock movement being prepared for transport








Hindley telescope in its showcase for Keeping Time 





Matthew Read preparing the telescope for transport
















The "Keeping Time" exhibition at Fairfax House, York, ended on 30 December 2012, and Friday 4 January 2013 two of the star items, the John "Longitude" Harrison clock, of 1727, from Leeds Museums and Galleries, and the Henry Hindley telescope, of 1742, from Burton Constable Hall, were dismantled and prepared for transport with the expert help of Matthew Read, clocks programme tutor at West Dean College, and one of his students, Tim Hughes. The Harrison clock is safely back at Leeds Museum Discovery Centre. The Hindley telescope is at West Dean College now for an extensive programme of conservation and recording, a project that is being funded by a very generous donor, Josie Rowland. The telescope has been blogged about before, it is of tremendous importance within the history of scientific instruments, being the first-ever equatorially mounted telescope, with some technical details about the thread-cutting that has even Matthew a little puzzled. The full dismantling, recording and analysis should be very revealing. The other one made by Hindley is at the Science Museum. There will be blogs about this project as it progresses. The aim is to share the information gained as widely as possible, and to that end a study day is planned, as are papers for Antiquarian Horology Society, and the Scientific Instrument Society. Its display and interpretation at Burton Constable Hall will be informed by what is revealed, as well as the historic context. The dance of communication between curator, conservator and education specialists is what creates the unique offer for visitors that great museums aspire to, and the curatorial committee at Burton Constable Hall, of which I am a member, is looking forward to making the most of this unique and significant navigational and astronomical instrument.

Antiquarian Horological Society
Scientific Instrument Society
West Dean College
http://en.wikipedia.org/wiki/Henry_Hindley
Burton Constable Hall
Equatorial mounts

Posted by Ian Fraser


Wednesday, 12 December 2012

John Harrison display at Leeds City Museum

Picture by Jeff Darken

The incalculable contribution John Harrison made to navigation science, by proving that precision timekeeping was the most practical method of determining longitude, has been written about in earlier blogs, under History of Science. The plans to display the John Harrison clock in the Leeds collections, the clock on which Harrison began his precision timekeeping research in response to the Longitude Act of 1714, are moving forward. Appropriately this new permanent display will be adjacent to the World View gallery. One of the features of the display, recently commissioned, and its manufacture under way, is a circular tablet, one metre in diameter that will be let flush into the floor adjacent to the showcase. It has been designed by the project team and it is being made in the marquetry technique by Jack Metcalfe. It will mark the longitude and latitude of its location, and the points of the compass. The line of longitude, or meridian, will be formed of a bar of brass and steel, like a bimetallic strip, one of Harrison's most significant inventions.
The grain of the oak veneer is aligned radially, like the oak cogs of Harrison's early clocks. The centre will be a disc of lignum vitae, a wood he used for friction reduction. The points of the compass will be formed in a black-coloured wood, as will be the longitude and latitude numbers. The font is called Caslon and was in common usage during the 18th century. The meridian line and line of latitude will, of course, run through the centre of the disc. The entire disc will be protected by toughed glass, and be flush to the floor.
Floor tablet completed, awaiting the stage of display development
when it can be installed.

Installations

Floor tablet installation

Showcase installation










Installations continue, LMG's Harrison precision pendulum
clock No. 2 due for installation shortly, to the left of copy movement
borrowed from the National Maritime Museum.
Leeds Harrison clock to be installed shortly,
watch this space!


Posted by Ian Fraser



Monday, 24 September 2012

Curatorial and conservation support for Keeping Time exhibition at Fairfax House, York


Fairfax House, York, is holding an exhibition, Keeping Time. This exhibition focuses on and celebrates the excellence and innovation of clock and scientific instrument makers from Yorkshire. Centrepiece of the exhibition is the John Harrison precision pendulum clock No. 2, on which Harrison began his precision timekeeping research in response to the Longitude Act of 1714. Harrison's research eventually led to the practical solution to determining longitude. Not knowing one's longitude was a major navigational problem, and had often spelt disaster for mariners, either getting lost, or running into obstacles, running out of sea room, and ending up on lee shores. This Harrison clock has been written about in earlier blogs, under History of Science. Loaned from Leeds Museums and Galleries, the exhibition opens on 5 October, 2012 and runs through to the end of December. Following on from suggestions from LMG staff, Fairfax House has also borrowed the Harrison brothers sundial made for Holy Trinity Church, Barrow-upon-Humber, and the highly signficant equatorially mounted telescope, made by Henry Hindley of York, and which is part of the scientific instruments and specimens collection at Burton Constable Hall.

http://www.fairfaxhouse.co.uk/?idno=687&id=132

http://www.burtonconstable.com




Tuesday, 14 June 2011

The first UK telephone call



This mysterious looking polished wooden object (one of a pair) is actually part of the equipment through which the first ever telephone conversation passed in the United Kingdom. Its significance might have been lost for ever without the remains of an old museum label which stated that it was an "early telephone receiver" made and donated by James E. Bedford. Unlabelled this would have probably remained as an unregarded "mystery object" in the museum stores.


In 2010 we had an enquiry from a descendent of James's brother Charles S. Bedford asking to see what was reputed to be "the first telephone in made England" and were able to locate it and start to understand its significance, but the evidence was still just anecdotal. Earlier this month we received a letter from George Rudram, a volunteer at Amberley Museum in West Sussex which helps shed light on the claim and enclosing a copy of an article in "The Telegraph and Telephone Journal" from April 1933.


The article is based on an interview with Mr Charles S. Bedford, Managing Director of the Leeds firm of Wood & Bedford, manufacturing chemists:

"In 1876, he and his brother the late Mr James Edward Bedford, later to become the first Lord Mayor of Leeds in the Great War period, were two youths interested in all kinds of mechanical contrivances. To assist them in their hobby, they perused among others, the periodical "Scientific Americans". From it they were vastly intrigued by a description of Graham Bell's new invention, the telephone, and they immediately decided to make two replicas.


A suitable piece of beech was first obtained and by turning on a lathe the frames of two telephones were evolved. Mr. Charles Bedford has rather poignant memories of this lathe, for he states that he provided the necessary power, whilst the future Lord Mayor performed the more skilled operations. For the next stage a bar of steel 2 feet long and 5/8 inch diameter was obtained and cut to the desired lengths. The pieces were then bored and tapped for an adjusting screw, and magnetised.


The diaphragms were made of thin ferro-type plate and were very similar to the modern type. The coils were made of fine wire wound round bobbins, the latter being fixed to the bar magnet and the two ends of the wire coils led out to terminals at the other end of the magnet. A wooden cup, bevelled in the centre similar to the present receiver caps, was fitted by means of screws, and the combined receiver-transmitter was ready.


Bell wire was run on pot insulators from the attic to a workshop about 30 yards away in the grounds of their residence, Sycamore Lodge, Woodhouse Cliff, Leeds. The internal leads to the instruments were of gutta-percha covered wire.


Although no batteries were used, speech could be heard quite plainly at the first trial after a preliminary adjustment of the adjusting screws.


The first conversation over the line was:-

"Are you there?"

"Yes, I am, will you count?"

"1,2,3,4,5,6,7,8,9"

"That's all right. Will you go through the alphabet."

"A.B.C.D.--"

"Wait a minute while I adjust the screw."


The new telephone was an object of interest to all the friends of the family and many were the demonstrations given in the evenings."


The original instruments were donated to Leeds Museums by James Bedford in the early 1920s.


It appears from the chronology that James and Charles Bedford just managed to make their replica telephone before Graham Bell patented his invention in England. Bell had been granted his US patent in March 1876. The Bedford brothers first tried out their version in October and Bell was granted his English patent in December. Bell's telephone was first officially exhibited in England in August 1877 to the British Association at Plymouth and was demonstrated to Queen Victoria in January 1878.





Friday, 5 November 2010

The Good, The Bad, and The Ugly

I am reminded regularly of the extraordinary variety of items in the collections at Leeds Museums and Galleries, like the exquisitely made and highly significant Harrison precision pendulum-clock






Il Buono


(picture by Jeff Darken)





And the Hinton House state bed, whose tester, the original construction of which is so poor that it was collapsing under its own weight, and it requires, essentially, re-engineering, giving it the structure it never had. The new structure supporting the collapsing parts will be entirely hidden behind the cornice.











Il Cattivo






































And these examples of Victorian excess, papier-mache furniture, lacquered and heavily decorated with mother of pearl inlay and painted floral images. They remind me of the Little Britain character Bubbles De Vere, pretentious and tasteless.









Il Brutto


















Posted by Ian Fraser









Tuesday, 26 October 2010

The white heat of 18th century technology (Britain's Got Brains)













































This is the world's first equatorially mounted telescope, an exquisitely made object made by one of the most eminent clock and scientific instrument makers of the 18th century, Henry Hindley of York.













It is part of the historic collections of Burton Constable Hall, with whom Temple Newsam House and Leeds Museums and Galleries has a close working relationship. It has recently been at the Leeds Museum Discovery Centre so that Matthew Read, clocks programme tutor at West Dean College, could inspect and assess it for Burton Constable's curatorial team. It requires conservation treatment and will be a likely candidate for a PRISM grant.










Exquisitely made, one wonders how they were able to achieve such incredible fineness and accuracy. It was made to measure transits of heavenly bodies such as the moons of Jupiter, Venus etc. All part of the star mapping, astronomy, navigation, map-making endeavour, gentlemen scientists around the UK, such as William Constable, undertaking their observations and sharing them. It is missing its drive motor entirely, however. It would have been essentially a clock mechanism, weight driven, and pendulum controlled, that compensated for the rotation of the Earth, to allow the telescope to track the transit with the factor of the Earth's rotation removed from the equation. Telescopes of these types were mounted parallel to the equator.








Interesting fact: the cross-hairs on graticules of this period are made from spider silk. A graticule is simply a piece of thin glass with reference marks on it, usually a grid, in order to have fixed references to measure against. They are needed in telescopes and microscopes if one is trying to measure a distance, or movement. In the store at Leeds Museum Discovery Centre we had for a time together two items representing the white heat of 18th century technology, this telescope and the Harrison clock. They were both cutting edge stuff, the rocket science of that time, one for mapping the heavens, the other for precision timekeeping.






Harrison clock pictures courtesy of Jeff Darken.


































































Posted by Ian Fraser



Tuesday, 18 May 2010

Harrison precision pendulum-clock x-ray









An x-ray of a wheel, in this case the great wheel, from John Harrison's precision pendulum-clock No. 2, reveals some interesting details about its construction, and some hints as to Harrison's roots as a joiner in a largely rural area. First, the movement is made almost entirely of oak. There are some small components made of lignum vitae, a very dense and waxy tropical hardwood from the West Indies and Central Amercia. Its waxiness means that it has a very slippery, smooth surface. Harrison used them for friction reduction without lubrication and he probably learned about this material from ship's carpenters in Hull and on the Humber estuary.















The picture above shows the use of lignum vitae in the mechanism of a wooden ship, in this case a roller pinion used to help ease the steering linkages to the rudder. The ship is a copy of the VOC Batavia, moored in Zuider Zee, the Netherlands.



The construction of the wheels of the Harrison clock movement is very similar to the construction of the wooden wheels seen in the machinery of wind and water mills.











The grain of the wooden teeth is aligned radially, like sunbeams. For Harrison's clock wheels and cogs this was done by gluing blanks of wood into a groove cut into the edge of the wheel, and then forming the teeth. If the wheel had been formed from one piece of wood, the teeth at the short grain parts of the wheels would have snapped off. Whilst there is no direct evidence that the Harrisons worked on windmills, the fact is Lincolnshire had hundreds of them, a good supply of wind readily available from the North Sea, to power the windmills that ground the wheat that grew in the flat lands of Lincolnshire. An interesting feature is that Harrison used very slow growing quartered oak for the main body of the wheels. The annual rings are very close together, so the wheel is both very stable and light. The wood for the teeth is, however, from fast growing oak. It is denser and therefore stronger, strength where it is needed. Harrison really knew his onions when it came to materials, an engineering approach to woodworking. My own tests comparing the weights of slow grown and fast grown oak show that the slow grown is a considerable 27% lighter than the fast grown oak. The picture below (picture credit Jeff Darken) is a cog from Harrison's precision pendulum-clock No. 2. The inner construction is shown in the x-ray at the top of this blog entry. The roller pinions are of lignum vitae. There is an earlier blog entry about this clock, search under Conservation.

Picture by Jeff Darken

A BBC documentary on John Harrison is available on iPlayer until 24/05/2010

http://www.bbc.co.uk/iplayer/episode/b00sj1pc/b00sj1fv/A_History_of_the_World_The_Clock_That_Changed_the_World/

And a Yorkshire Post article

http://www.adam-hart-davis.org/articles/yorkshire%20post%2013%20may%202010.pdf

http://www.nmm.ac.uk/blogs/collections/2010/07/research_on_harrisons_second_t.html

http://www.nmm.ac.uk/blogs/collections/2010/07/research_on_harrisons_second_t_2.html

The Science Museum's website included a section on Making the Modern World; the subject of navigation and the technologies developed to enable precise navigation and mapmaking features on the link below:

http://www.makingthemodernworld.org.uk/stories/enlightenment_and_measurement/01.ST.06/?scene=5

The Science Museum also has one of Harrison's earliest clocks, before he began his longitude experiments:

http://www.makingthemodernworld.org.uk/icons_of_invention/technology/1750-1820/IC.021/




Friday, 30 April 2010

John Smeaton's model for the foundation of the Eddystone lighthouse












John Smeaton was a great 18th century engineer, from Austhorpe, Leeds. He coined the term "civil engineer" and the symbol used by the Institute of Civil Engineers is an image of one of Smeaton's most famous creations, the Eddystone lighthouse, built on the Eddystone Rocks fourteen miles from Plymouth, in the English Channel . The Eddystone Rocks are a major shipping hazard and are marked by a lighthouse beacon as a warning to shipping. The first lighthouse lasted only five years and was destroyed, and its keeper killed, in a truly fearsome storm, of hurricane proportions, in 1703. Smeaton's lighthouse, the third to be built on the Eddystone Rocks, lasted much longer, from 1759 until 1877. The structure itself was sound, but it was the rocks underneath that were being undermined by wave action that led to the decision to replace Smeaton's lighthouse. At the end of its serviceable life the citizens of Plymouth had it dismantled and re-built in Plymouth, so proud were they of this extraordinary pioneering structure. The Leeds collections have the model that Smeaton made for the foundation of the lighthouse. It underwent conservation a while ago, to glue back together some of the wooden components. It is made of oak, and it was in effect the instructions to the masons on how to make the flat platform on which to build the lighthouse. It is comprised of interlocked stones, dovetailed together and let into dovetailed recesses cut into the Eddystone Rock, to key it all together. The story of the lighthouse's innovative and pioneering design and construction is a fascinating vignette of someone who could engage the brain and solve a significant problem.
Institute of Civil Engineers:



A great little primary school in Austhorpe, Leeds, also uses the the Eddystone lighthouse as the signature symbol of the school. This beacon of learning is rightly proud of Austhorpe's greatest son:

During the spring and summer of 2011 Temple Newsam House had a John Smeaton exhibition. Smeaton undertook several projects at Temple Newsam House and estate for the Irwins. The exhibition gave an overview of Smeaton's career and significance, as well as details of his most important accomplishments, especially his famous lighthouse. In addition to items from Leeds collections, we were privileged to borrow objects from the Royal Society, of whom Smeaton was not only a Fellow, but a Copley Medallist as well.

An old West Country folk song about the Eddystone lighthouse is good fun!
Eddystone Lighthouse folksong